FDNY CoF - Non‑Flammable Compressed Gases (G‑46) Practice Test

These questions are part of the practice quiz. Start practicing

• How far should areas be avoided where a container could drop?
• What is the maximum allowed storage of flammable gas in any building?
• What action is essential to take before using any gas container?
• What requirement must be fulfilled when storing compressed non-flammable gases over a certain quantity?
• What should be done when terminating the use of a gas cylinder?
• What type of protective gear should be worn when handling gas cylinders?
• When transporting a gas container, what must be removed?
• Before opening the container valve, what must be securely attached?
• What should not be used to suspend cylinders?
• Which type of permit does not allow for overnight storage?
• The storage of compressed gases shall be under the supervision of which certificate holder?
• What is the minimum percentage of oxygen that non-flammable gases avoid ignitability at?
• For which classes above 15 PSI must excess flow control be provided?
• Why is it important to keep the area around gas cylinders clear?
• What is the guideline for using non-flammable gases in an educational setting?
• What is a common risk when improperly handling compressed gases?
• What should be kept readily available when working with compressed gases?
• What is a common use of non-flammable compressed gases in industry?
• What must be ensured to avoid obstruction in the seller’s warehouse regarding cylinders?
• Which of the following risks is associated with acetylene?
• When storing compressed gas containers, what should be done to ensure safety?
• Cylinder tare weight is the weight of the cylinder plus the what without the product?
• Why is proper ventilation important when using non-flammable gases?
• The transfer of non-flammable compressed gases must be performed by whom?
• How frequently should gas cylinders be inspected for safety?
• How many compressed gas containers may be stored in a single gas cabinet?
• What is the minimum distance combustible waste and vegetation should be kept from compressed gas containers?
• Why should you avoid using damaged gas cylinders?
• Gas containers should be grouped by what factor?
• Piping systems shall consist of the name of contents and direction of what?
• What is the purpose of ensuring the regulator is securely attached before opening the gas container valve?
• Which valve must be opened manually?
• What safety equipment is essential when handling compressed gases?
• What is the best practice regarding the use of face shields with gas cylinders?
• What type of documentation is required when using compressed gases at a facility?
• How should empty gas cylinders be labeled?
• What should be the first step if a gas cylinder falls over?
• What is a key safety measure during the transportation of gas cylinders?
• Non-flammable gases do not have a flammable range at 14.7 PSIA with air of at least what percentage?
• What should you check before using a non-flammable gas cylinder?
• Compressed gas containers should not be used for what purpose?
• In general practice, how should compressed gas containers be handled in a storage situation?
• What is important to ensure regarding the pressure in compressed gas systems?
• A star stamp indicates that the cylinder meets the requirements for a how many year retest?
• What is required for emergency responders when dealing with compressed gas incidents?
• What is a common precaution when storing gas cylinders?
• Which types of gases are classified as non-flammable compressed gases?
• Do not use any container that is unmarked or has conflicting what?
• What steps should be taken during the refilling of gas cylinders?
• How should hoses be maintained to protect them from damage?
• Which safety procedure is critical when handling cryogenic gases?
• Why are non-flammable gases used in cryogenic applications?
• Permits are not transferable; what happens if there is a change in operation?
• How far must compressed gas containers be kept from air conditioning units?
• What type of sign should be posted at the entrance to rooms or on cabinets containing gas containers?
• What is one characteristic that non-flammable gases share?
• How should compressed gas containers be separated?
• Non-flammable gases are considered non-ignitable at 14.7 PSIA with a mixture of what percentage or less?
• How often should gas cylinders be visually inspected?
• Why is it important to understand the properties of gases like nitrogen and argon?
• What is the role of a safety data sheet in relation to compressed gases?
• What is the main characteristic of a non-flammable gas that makes it useful in welding applications?
• Compressed gas containers must be secured well to prevent what?
• What should be prominently posted in areas where gas containers are stored?
• What is the required direction for pressure relief devices to discharge?
• How should non-flammable gas cylinders be stored?
• What should not be used to transport gas cylinders?
• What gas is characterized by a smell resembling rotten eggs?
• What is the recommended method for transporting gas cylinders?
• Which type of valves must be opened by hand?
• What should be done if a gas leak is suspected from a cylinder?
• Which gas has a sweet odor?
• What is the minimum distance at which markings must be provided throughout the piping run?
• At all times, which valve must remain closed?
• The transportation of hazardous materials should be accompanied by which of the following?
• What should not be interchanged between different sizes?
• A "+" indicates that the cylinder qualified for a what percent overfill?
• Which of the following is not a characteristic of a citywide permit?
• What must be attached to each of the control valves before using a gas container?
• Handling and use of compressed gas containers and systems shall be provided with approved what by natural or artificial means?
• What type of training emphasizes emergency procedures for compressed gas incidents?
• Acetylene is categorized as a __________ gas.
• What does CoF stand for in FDNY regulations?
• What is a "cryogenic" gas?
• Which regulatory body oversees compliance for the use of non-flammable gases in New York?
• What indication suggests a gas cylinder may be unsafe to use?
• Compressed gas cylinders should be stored in an area that is?
• At what PSI at 68F do gases qualify as compressed?
• What is the first action to take in case of a gas leak during the handling of compressed gases?
• What is the recommended storage limit of flammable gas per conveyor in buildings?
• How is leakage from a gas cylinder typically detected?
• What special training is recommended for personnel handling compressed gases?
• What should be done if a gas cylinder is leaking?
• Why is it important to ensure non-flammable gas cylinders are secure during storage?
• What is the minimum distance to segregate incompatible materials in storage?
• The permitted operation of hazardous materials requires compliance with what type of regulations?
• To isolate incompatible materials in storage, what minimum height should the partition be above the stored material?
• Incompatible materials should be separated unless their combined capacity is less than what?
• Which type of personal protective equipment should be worn when handling compressed gases?
• What safety measure should be followed while working with flammable compressed gases?
• How many days can a citywide permit be valid for conducting operations at multiple locations?
• How should personnel report safety violations related to gas cylinders?
• What are the potential environmental hazards associated with compressed gases?
• When handling gas containers, it is important to always ensure safety by keeping what closed?
• The current owner of the cylinder will appear on which part of the cylinder?
• What does the term "inert gas" refer to?
• What is the primary purpose of obtaining a CoF for non-flammable compressed gases?
• A permanent site specific permit is valid for how many months?
• Which type of handles shall not be altered to hinder operation?
• Where is the refilling of compressed flammable gas containers strictly prohibited?
• What is an essential precaution to take with compressed gas containers?
• What is the maximum quantity of compressed gas allowed per floor at construction sites?
• Storage handling and use of compressed flammable gas above what SCF requires a permit?
• What is the maximum angle at which the axis of compressed gas containers may be inclined?
• What is the maximum surface temperature to which containers shall not be heated?
• Compressed gas containers should be kept a minimum of how many feet from ordinary electrical equipment?
• What does the acronym "MSDS" stand for?
• For cylinders, it is best practice to avoid which of the following safety hazards?
• What triggers the requirement for signage regarding hazardous materials?
• Why is proper labeling of gas cylinders important?
• What should be done with damaged gas cylinders?
• What is a critical procedure before initiating gas flow?
• What must a temporary permit holder do if the duration of their operation exceeds the initial permit?
• What can result from the failure of a high-pressure gas cylinder?
• Which of the following is NOT a characteristic of a compressed gas?
• What should always be checked before using a gas cylinder?
• What is the main hazard related to gas container storage?
• According to state municipal law, the storage of flammable gases must be reported under which regulation?
• What type of gas containers must be regularly inspected for leaks?
• What method can help prevent fire hazards with gas containers?
• What is the purpose of a pressure relief valve on a gas cylinder?
• A compressed gas is a material that is a gas at what temperature in degrees Fahrenheit?
• Containers shall be stored upright unless they have an internal volume of less than what?
• Can non-flammable gases be mixed in the same cylinder?
• Handling and use of which systems must be supervised by a G-46 COF holder?
• What is an essential step in the safe storage of gas cylinders?
• Which of the following gases is known to smell like garlic?
• What type of valve is typically found on a compressed gas cylinder?
• What should you not rely solely on to identify the contents of a container?
• In regard to gaseous handling, who is responsible for general supervision of gas storage?
• What action should be taken if a gas cylinder is damaged?
• Why is understanding pressure ratings important for handling gas cylinders?
• How often should the COF holder inspect for ignition sources?
• Which of the following is true about the labeling of gas storage areas?
• Which category of gas is not considered "non-flammable"?
• How do you determine the correct gas for a specific application?
• What is the general maximum operating pressure for a standard non-flammable gas cylinder?
• What characteristic must be noted about the storage environment for compressed gases?
• When should respiratory protection be utilized while handling compressed gases?
• Why should flammable materials be kept away from compressed gas cylinders?
• When was a new fire code adopted in New York City?
• What is the main focus of the regulations regarding storage of hazardous materials?
• What is the best way to secure gas cylinders when not in use?
• Which one of the following is a characteristic of non-flammable compressed gases?
• What does regularly inspecting gas cylinders help to prevent?
• Partially full compressed gas containers containing residual gases shall be considered what for the purposes of controls required?
• Exceptions to markings apply to piping designed to carry more than one gas and what type of plants?
• Which regulatory compliance must be adhered to when using compressed gases?
• What is the nature of hydrogen sulfide in terms of health hazard?
• What is the significance of a cylinder's color coding?
• What is the maximum allowable percentage of flammable gas in a mixture to consider it non-ignitable?
• What should you do immediately when transporting a filled gas container?
• Which of the following should be avoided when using compressed gases?
• Which safety precaution should be a priority when handling compressed gas containers?
• Can non-flammable gases be stored outdoors?
• What type of environment is preferred for working with compressed gases?
• What is a common sign of a gas leak from a cylinder?
• Who is responsible for conducting safety inspections of compressed gas storage areas?
• Which items are not to be interchangeably used among different gas types?
• Which of the following is NOT a safety consideration when handling compressed gases?
• What is the purpose of signage related to hazardous materials?
• What is considered a primary hazard of non-flammable compressed gases?
• Can non-flammable gases be used in confined spaces?
• Gas cabinets must be constructed of steel that is not less than how thick?
• How should a gas cylinder be secured during storage?
• Why is correct marking of compressed gas containers important?
• Which of the following statements about permits is true?
• Which type of gas system necessitates the personal supervision of a G-46 COF holder for its handling and use?
• What should be checked regularly on compressed gas containers?
• What potential dangers arise from improperly using gas cylinders?
• What precaution should be taken regarding cylinder valves?
• What is a critical requirement for maintaining safety around gas containers?
• Flammable gas is ignitable in a mixture of what percentage or less?
• What should be done if there is uncertainty about the safety of a gas cylinder?
• What is an essential action before connecting a non-flammable gas cylinder for use?
• What should you avoid when handling compressed gas cylinders?
• Charged and empty containers should be stored in what manner?
• How should gas cylinders be transported?
• What must be done in case of a gas cylinder fire?
• Temporary permits may be valid for a maximum duration of how many months?